Floor-Tite Fibre Floorboard Countersunk Wood Screws

Floor-Tite Fibre Floorboard Countersunk Wood Screws

• Floor-Tite is based around the revolutionary MDF-Tite but designed to meet the specific demands of today's high density fibre floorboards. Increasing the diameter from 3.9mm to 4.2mm matches the heavier boards used in the flooring industry
• Based on the revolutionary 'Tri-Lock TS' threadform which uniquely incorporates the benefits of a single thread and a twin thread on the same screw.
• Blue Net coat finished
• Pozidriv countersunk head
• Part thread eliminates ‘jacking’ where a full threaded screw tends to pull apart the jointed material.
• TS Thread (Exaggerated) - Utilises benefits of both twin and single thread on the same screw. Single Coarse Thread drives in without reaming a hole in the material, enabling a swift effciant fix with high pullout retention. Twin Thread penetrates the dense surface and balances the screw with two points of pickup that start right at the tip of the screw.
• Cutting edge ribs under the head ream and self - countersink the screw.
• Permeated case with through hardening allows the perfect balance between core ductility and surface toughness - with the strength of a high tensile bolt the screw will not snap.
• Tri - Lock Threadform Three flats on thread means less surface contact between screw and material when driven in - which means less battery wear, easier to insert and the screw will not work loose over time as the material flexes under use