Lost-Tite Concealed Head Wood Screws

Lost-Tite Concealed Head Wood Screws

• Lost-Tite is designed for applications where a discreet fix is needed, such as skirting boards and cladding.
• With the Tri-Lock TS threadform the screw will drive straight through the boards & into the substrate without pre-drilling. (Even hardwoods!)
• Quick & easy to install and remove, with the benefit of a secure fix. (No more squeaks.)
• Star Recess Torx drive forg reater grip and control on application. Free driver in every box
• Part Thread reduces ‘Jacking’ where a full threaded screw tends to pull apart the jointed material.
• Net-Coat yellow plated
• Utilises benefits of both twin and single thread on the same screw. Single coarse thread designed to eliminate the ream out of the floor boarding, giving high pull out retention. Twin Thread breaks even the hardest floor boarding surface and delivers a balanced point of pick up.
• Lost head gives an semi-concealed neat flush fix.
Hardened screw specifically developed so the screw will not break as the flooring flexes under use.
• Tri - Lock TS Threadform, three flats on thread means less surface contact between screw and floorboard when driven in - which means less battery wear, easier to insert and the screw will not work loose as the boards are walked upon.
• It is recommended that you insert the Lost-Tite screw at an angle of 30 - 45 degrees to the exposed face on the tongue side, and start where the tongue & face intersect.
• For a secure fix use a screw every 300mm. (If inserting a screw 50mm from the end of the board we recommend that you pre-drill to stop any splitting.)