Tonque-Tite Tongue & Grove Flooring Wood Screws

Tonque-Tite Tongue & Grove Flooring Wood Screws

• Tongue-Tite® is a specialist screw designed for softwood, hardwood, engineered and fibre tongue & groove floorboards.
• With the Tri-Lock TS threadform the screw will drive straight through the boards & into the substrate without pre-drilling. (Even hardwoods!)
• Quick & easy to install and remove, with the benefit of a secure fix. (No more squeaks.)
• Star Recess Torx drive forg reater grip and control on application. Free driver in every box
• Part Thread reduces ‘Jacking’ where a full threaded screw tends to pull apart the jointed material.
• Net-Coat yellow plated
• Utilises benefits of both twin and single thread on the same screw. Single coarse thread designed to eliminate the ream out of the floor boarding, giving high pull out retention. Twin Thread breaks even the hardest floor boarding surface and delivers a balanced point of pick up.
• Narrow Countersunk head gives a neat flush fix to allow the next board to sit in place.
• Solid collar gives strength to the most vulnerable point of the screw.
Hardened screw specifically developed so the screw will not break as the flooring flexes under use.
• Tri - Lock TS Threadform, three flats on thread means less surface contact between screw and floorboard when driven in - which means less battery wear, easier to insert and the screw will not work loose as the boards are walked upon.
• Just one size (3.5 x 45mm) to suit the popular floorboards currently used in today’s market.
• It is recommended that you insert the Tongue-Tite screw at an angle of 30 - 45 degrees to the exposed face on the tongue side, and start where the tongue & face intersect.
• For a secure fix use a screw every 300mm. (If inserting a screw 50mm from the end of the board we recommend that you pre-drill to stop any splitting.)